Allied Telesis AT-9000 Series User Manual

AT-9000 Switch Command Line User’s Guide
1359
Displaying the Telnet Server
To display the status of the Telnet server, use the SHOW TELNET
command in the User Exec mode or Privileged Exec mode. Here is the
command:
awplus# show telnet
Here is the information the command displays.
Figure 217. SHOW TELNET Command
Telnet Server Configuration
-------------------------------------------
Telnet server : Enabled

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English