AT-9000 Switch Command Line User’s Guide
1031
SHOW SNMP-SERVER COMMUNITY
Syntax
show snmp-server community
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the SNMPv1 and SNMPv2c community
strings on the switch. Here is an example of the display.
Figure 178. SHOW SNMP-SERVER COMMUNITY Command
The fields in the entries are described in Table 90.
Table 90. SHOW SNMP-SERVER COMMUNITY Command
Parameter Description
Community Name The community string.
Access The access level of the community string.
The possible access levels are Read-
Write and Read-Only.
View The name of an SNMP view that defines a
portion of the MIB tree that the community
string is not permitted to access.
Community strings that are not assigned
views have a value of None, which means
they have access to the entire MIB tree.
SNMP community information:
Community Name ............. private
Access .................. Read-Write
View .................... None
Community Name ............. public
Access .................. Read-only
View .................... None
To Next Page
Loading...
Need help?
General
