785
Chapter 50
Port-based and Tagged VLAN
Commands
The VLAN commands are summarized in Table 72 and described in detail
within the chapter.
Table 72. Port-based and Tagged VLAN Commands
Command Mode Description
“NO SWITCHPORT ACCESS VLAN”
on page 786
Port Interface Removes untagged ports from
VLANs.
“NO SWITCHPORT TRUNK” on
page 787
Port Interface Removes the tagged designation from
ports.
“NO SWITCHPORT TRUNK NATIVE
VLAN” on page 788
Port Interface Reestablishes the Default_VLAN as
the native VLAN of tagged ports.
“NO VLAN” on page 789 VLAN
Configuration
Deletes VLANs from the switch.
“SHOW VLAN” on page 790 User Exec and
Privileged Exec
Displays all the VLANs on the switch.
“SWITCHPORT ACCESS VLAN” on
page 792
Port Interface Adds untagged ports to a VLAN.
“SWITCHPORT MODE ACCESS” on
page 794
Port Interface Designates ports as untagged ports.
“SWITCHPORT MODE TRUNK” on
page 795
Port Interface Designates ports as tagged ports.
“SWITCHPORT TRUNK ALLOWED
VLAN” on page 797
Port Interface Adds and removes tagged ports from
VLANs.
“SWITCHPORT TRUNK NATIVE
VLAN” on page 800
Port Interface Designates native VLANs for tagged
ports.
“VLAN” on page 802 VLAN
Configuration
Creates VLANs.
To Next Page
Loading...
Need help?
General
