Allied Telesis AT-9000 Series - Tacacs-Server Host

Chapter 91: RADIUS and TACACS+ Client Commands
1474
TACACS-SERVER HOST
Syntax
tacacs-server host ipaddress [key value ]
Parameters
host
Specifies an IP address of a TACACS+ server.
key
Specifies the secret key of a TACACS+ server. The maximum
length is 40 characters.
Mode
Global Configuration mode
Description
Use this command to add IP addresses of TACACS+ servers to the
TACACS+ client in the switch. The list can have up to three TACACS+
authentication servers, but you can add only one at a time with this
command.
Confirmation Command
“SHOW TACACS” on page 1472
Example
This example adds the IP address 149.11.24.1 to the TACACS+
authentication server list. The server has the key “kenken16:”
awplus> enable
awplus# configure terminal
awplus(config)# tacacs-server host 149.11.24.1 order 2 key
kenken16