Allied Telesis AT-9000 Series User Manual

691
Chapter 46
RSTP Commands
The RSTP commands are summarized in Table 66 and described in detail
within the chapter.
Table 66. Rapid Spanning Tree Protocol Commands
Command Mode Description
“NO SPANNING-TREE PORTFAST”
on page 693
Port Interface Removes ports as edge ports on the
switch.
“NO SPANNING-TREE
ERRDISABLE-TIMEOUT ENABLE”
on page 694
Global
Configuration
Deactivates the RSTP BPDU guard
timer.
“NO SPANNING-TREE LOOP-
GUARD” on page 695
Port Interface Disables the BPDU loop-guard feature
on the ports.
“NO SPANNING-TREE PORTFAST
BPDU-GUARD” on page 696
Port Interface Disables the BPDU guard feature on a
port.
“NO SPANNING-TREE RSTP
ENABLE” on page 697
Global
Configuration
Disables RSTP on the switch.
“SHOW SPANNING-TREE” on
page 698
User Exec and
Privileged Exec
Displays the RSTP settings on the
switch.
“SPANNING-TREE ERRDISABLE-
TIMEOUT ENABLE” on page 700
Global
Configuration
Activates the RSTP BPDU guard
timer.
“SPANNING-TREE ERRDISABLE-
TIMEOUT INTERVAL” on page 701
Global
Configuration
Specifies the duration the RSTP
BPDU guard timer.
“SPANNING-TREE FORWARD-TIME”
on page 702
Global
Configuration
Sets the forward time, which specifies
how long ports remain in the listening
and learning states before they
transition to the forwarding state.
“SPANNING-TREE GUARD ROOT”
on page 703
Port Interface Enables the Root Guard feature on a
port.
“SPANNING-TREE HELLO-TIME” on
page 704
Global
Configuration
Sets the hello time, which defines how
frequently the switch sends spanning
tree configuration information when it
is the root bridge or is trying to
become the root bridge.

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English