545
Chapter 33
File Transfer Commands
The file transfer commands are summarized in Table 50 and described in
detail within the chapter.
Table 50. File Transfer Commands
Command Mode Description
“COPY FILENAME ZMODEM” on
page 546
Privileged Exec Uses Zmodem to upload files from the
file system in the switch.
“COPY FLASH TFTP” on page 547 Privileged Exec Uses TFTP to upload files from the
switch.
“COPY TFTP FLASH” on page 548 Privileged Exec Uses TFTP to download new versions
of the management software, boot
configuration files, or CA certificates to
the switch.
“COPY ZMODEM” on page 550 Privileged Exec Uses Zmodem to download new boot
configuration files or CA certificates to
the switch.
“UPLOAD IMAGE REMOTELIST” on
page 551
Global
Configuration
Uses enhanced stacking to download
the management software on the
command switch to other switches.
To Next Page
Loading...
