Allied Telesis AT-9000 Series - Removing Ports from the Authenticator Role

Chapter 62: 802.1x Port-based Network Access Control
958
Removing Ports from the Authenticator Role
To remove ports from the authenticator role so that they forward traffic
without authenticating supplicants, go to the Port Interface mode of the
ports and enter the NO DOT1X PORT-CONTROL command. This
example removes the authenticator role from ports 1.0.1 to 1.0.4 and
1.0.18:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.4,port1.0.18
awplus(config-if)# no dot1x port-control