Allied Telesis AT-9000 Series User Manual

Chapter 72: Address Resolution Protocol (ARP) Commands
1194
CLEAR ARP-CACHE
Syntax
clear arp-cache
Parameters
None
Modes
User Exec mode and Privileged Exec mode
Description
Use this command to delete all dynamic ARP entries from the ARP cache
on the switch.
Confirmation Command
“SHOW ARP” on page 1196
Example
The following example deletes all of the ARP entries dynamically added to
the ARP cache:
awplus> enable
awplus# clear arp-cache

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English