Allied Telesis AT-9000 Series User Manual

AT-9000 Switch Command Line User’s Guide
711
SPANNING-TREE PORTFAST BPDU-GUARD
Syntax
spanning-tree portfast bpdu-guard
Parameters
None
Mode
Port Interface mode
Description
Use this command to enable the BPDU guard feature so that the switch
monitors edge ports and disables them if they receive BPDU packets.
To disable an edge port that was disabled by the BPDU guard feature, use
the NO SPANNING-TREE PORTFAST BPDU-GUARD command.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 158
Example
This example enables the BPDU guard feature on port 4:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.4
awplus(config-if)# spanning-tree portfast bpdu-guard

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English