Allied Telesis AT-9000 Series - Show Vlan Vlan-Stacking; Figure 154: SHOW VLAN VLAN-STACKING Command

Chapter 59: VLAN Stacking Commands
908 Section III: File System
SHOW VLAN VLAN-STACKING
Syntax
show vlan vlan-stacking
Parameters
None.
Mode
Port Interface mode
Description
Use this command to display the port assignments of VLAN stacking.
Here is an example of the information.
Figure 154. SHOW VLAN VLAN-STACKING Command
Example
awplus> enable
awplus# show vlan vlan-stacking
TPID INTERFACES (c)-Customer-Edge Port, (p)-Provider Port
==== =========
0x9000 port1.0.1(c)
0x9000 port1.0.2(c)
0x9000 port1.0.3(c)
0x9000 port1.0.4(c)
0x9000 port1.0.5(c)
0x9000 port1.0.6(c)
0x9000 port1.0.7(c)
0x9000 port1.0.23(p)