Allied Telesis AT-9000 Series - Displaying or Clearing Port Statistics

AT-9000 Switch Command Line User’s Guide
189
Displaying or Clearing Port Statistics
To view packet statistics for the individual ports, use the SHOW
PLATFORM TABLE PORT COUNTERS command in the Privileged Exec
mode. Here is the format of the command:
show platform table port [ port ] counters
This example displays the statistics for ports 23 and 24:
awplus# show platform table port port1.0.23,port1.0.24
counter
The statistics are described in Table 16 on page 229.
To clear the port counters, use the CLEAR PORT COUNTER command,
which has this format:
clear port counter port
This example clears the counters for ports 1 and 4:
awplus# clear port counter port1.0.1,port1.0.4