Chapter 70: LLDP and LLDP-MED Commands
1128
CLEAR LLDP STATISTICS
Syntax
clear lldp statistics [interface
port
]
Parameters
port
Specifies a port. You can specify more than one port at a time in
this command. Omitting this parameter. specifies all the ports.
Mode
Privileged Exec mode
Description
Use this command to clear the LLDP statistics (packet and event
counters) on the ports. You can delete the statistics from all ports or from
selected ports.
Examples
This example clears the statistics of all ports:
awplus> enable
awplus# clear lldp statistics
This example clears the statistics for ports 1 to 3:
awplus> enable
awplus# clear lldp statistics port1.0.1-port1.0.3
To Next Page
Loading...
