AT-9000 Switch Command Line User’s Guide
1127
“NO LLDP MED-TLV-SELECT” on
page 1157
Port Interface Stops ports from transmitting specified
LLDP-MED TLVs.
“NO LLDP NOTIFICATIONS” on
page 1159
Port Interface Prevents ports from sending LLDP
SNMP notifications (traps).
“NO LLDP RUN” on page 1160 Global
Configuration
Disables LLDP on the switch.
“NO LLDP TLV-SELECT” on
page 1161
Port Interface Stops ports from sending optional
LLDP TLVs to their neighbors.
“NO LLDP TRANSMIT RECEIVE” on
page 1162
Port Interface Stop ports from transmitting and/or
accepting LLDP advertisements.
“NO LOCATION” on page 1163 Port Interface Removes LLDP-MED location
information from the ports on the
switch.
“SHOW LLDP” on page 1165 Privileged Exec Displays general LLDP settings.
“SHOW LLDP INTERFACE” on
page 1167
Privileged Exec Displays the LLDP port settings.
“SHOW LLDP LOCAL-INFO
INTERFACE” on page 1169
Privileged Exec Displays the current configurations of
the LLDP advertisements that the
ports on the switch can transmit to
LLDP-compatible neighbors.
“SHOW LLDP NEIGHBORS DETAIL”
on page 1171
Privileged Exec Displays detailed information the
switch has collected from its LLDP-
compatible neighbors.
“SHOW LLDP NEIGHBORS
INTERFACE” on page 1176
Privileged Exec Displays a summary of the information
gathered by the switch from its LLDP-
compatible neighbors.
“SHOW LLDP STATISTICS” on
page 1178
Privileged Exec Displays the LLDP statistics for the
entire switch.
“SHOW LLDP STATISTICS
INTERFACE” on page 1180
Privileged Exec Displays the LLDP statistics for the
individual ports.
“SHOW LOCATION” on page 1182 Privileged Exec Displays the civic, coordinate, and
ELIN location entries on the switch.
Table 101. LLDP and LLDP-MED Commands (Continued)
Command Mode Description
To Next Page
Loading...
