Allied Telesis AT-9000 Series - Show Dot1 X; Figure 169: SHOW DOT1 X Command

AT-9000 Switch Command Line User’s Guide
999
SHOW DOT1X
Syntax
show dot1x
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display whether 802.1x port-based network access
control is enabled or disabled on the switch and the IP addresses of the
RADIUS servers. An example is shown in Figure 169.
Figure 169. SHOW DOT1X Command
Example
This example displays the status of the 802.1x port-based network access
control feature and the IP addresses of the RADIUS servers:
awplus# show dot1x
802.1 Port-Based Authentication: Enabled
RADIUS server address (auth): 149.32.146.78