Allied Telesis AT-9000 Series - Page 1098

Chapter 69: LLDP and LLDP-MED
1098
Extended power
management
The following PoE information:
 Power Type field: Power Sourcing Entity
(PSE).
 Power Source field: current power source,
either Primary Power Source or Backup
Power Source.
 Power Priority field: power priority configured
on the port.
 Power Value field: In TLVs transmitted by a
Power Sourcing Equipment (PSE) such as
this switch, this advertises the power that the
port can supply over a maximum length cable
based on its current configuration (that is, it
takes into account power losses over the
cable). In TLVs received from Powered Device
(PD) neighbors, the power value is the power
the neighbor requests.
Inventory
management
The current hardware platform and the software
version, identical on every port on the switch:
 Hardware Revision
 Firmware Revision
 Software Revision
 Serial Number
 Manufacturer Name
 Model Name
 Asset ID
Table 97. Optional LLDP-MED TLVs (Continued)
TLV Description