AT-9000 Switch Command Line User’s Guide
1177
Examples
This example displays a summary of the information from all the neighbors
connected to the switch:
awplus# show lldp neighbors interface
This example displays a summary of the information from the neighbors
connected to ports 1 and 4:
awplus# show lldp neighbors interface port1.0.1,port1.0.4
Neighbor Port Name The number of the neighbor’s port that
sent the information.
Neighbor System Name The neighbor’s system name.
Neighbor Capability Capabilities that are supported and
enabled on the neighbor.
Table 107. SHOW LLDP NEIGHBORS INTERFACE Command
Parameter Description
To Next Page
Loading...
