AT-9000 Switch Command Line User’s Guide
1235
Example
The following example displays the RMON events on the switch:
awplus# show rmon event
Event type (continued) Log & Trap - The event enters a
message in the event log and sends
an SNMP trap.
Event community name The SNMP community string used to send
SNMP traps.
Last Time Sent The number of seconds the switch had
been operating when it last sent the event
trap.
Owner The owner of the event. The owner is
Agent if no owner was specified when the
event was created.
Table 118. SHOW RMON EVENT Command (Continued)
Parameter Description
To Next Page
Loading...
