AT-9000 Switch Command Line User’s Guide
1237
Example
The following example displays the history groups that are assigned to the
ports on the switch:
awplus# show rmon history
Data source ifindex The port of the history group.
Buckets requested The number of buckets that were
requested in the command that created
the history group.
Buckets granted The number of buckets allocated by the
switch for the history group. The value in
this field will be less than the value in the
buckets requested field if the switch did
not have sufficient memory resources
when you created the history group.
Interval The polling interval in seconds.
Owner The owner of the group. The owner is
Agent if no owner was specified when the
history group was created.
Table 119. SHOW RMON HISTORY Command (Continued)
Parameter Description
To Next Page
Loading...
