Chapter 8: Basic Switch Management Commands
132
“REBOOT” on page 152 Privileged Exec Resets the switch.
“RELOAD” on page 153 Privileged Exec Resets the switch.
“SERVICE MAXMANAGER” on
page 154
Global
Configuration
Sets the maximum number of
permitted manager sessions.
“SHOW BANNER LOGIN” on
page 155
Privileged Exec Displays the banner set with the
BANNER LOGIN command.
“SHOW BAUD-RATE” on page 156 Global
Configuration
Displays the settings of the Console
port.
“SHOW CLOCK” on page 157 User Exec and
Privileged Exec
Displays the date and time.
“SHOW RUNNING-CONFIG” on
page 158
Privileged Exec Displays all of the settings on the
switch, including those that have not
yet been saved in the active boot
configuration file.
“SHOW SWITCH” on page 159 Privileged Exec Displays general information about
the switch.
“SHOW SYSTEM” on page 161 User Exec Displays general information about
the switch.
“SHOW SYSTEM SERIALNUMBER”
on page 162
User Exec and
Privileged Exec
Displays the serial number of the
switch.
“SHOW USERS” on page 163 Privileged Exec Displays the managers who are
currently logged on the switch.
“SHOW VERSION” on page 165 User Exec and
Privileged Exec
Displays the version number and build
date of the management software.
“SNMP-SERVER CONTACT” on
page 166
Global
Configuration
Adds contact information to the
switch.
“SNMP-SERVER LOCATION” on
page 167
Global
Configuration
Adds location information to the
switch.
“SYSTEM TERRITORY” on page 168 Global
Configuration
Specifies the territory of the switch.
Table 8. Basic Switch Management Commands
Command Mode Description
To Next Page
Loading...
