Chapter 12: Power Over Ethernet Commands
256
“POWER-INLINE PRIORITY” on
page 270
Port Interface Assigns a PoE priority level to a port.
“POWER-INLINE USAGE-
THRESHOLD” on page 272
Global
Configuration
Sets the power threshold for the
SNMP power-inline trap.
“SERVICE POWER-INLINE” on
page 273
Global
Configuration
Activates PoE on all of the ports on
the switch.
“SHOW POWER-INLINE” on
page 274
Privileged Exec Displays switch and port PoE
information.
“SHOW POWER-INLINE COUNTERS
INTERFACE” on page 277
Privileged Exec Displays the port PoE event counters.
“SHOW POWER-INLINE
INTERFACE” on page 279
Privileged Exec Displays port PoE information.
“SHOW POWER-INLINE INTERFACE
DETAIL” on page 280
Privileged Exec Displays additional port PoE
information.
“SNMP-SERVER ENABLE TRAP
POWER-INLINE” on page 283
Global
Configuration
Activates the SNMP power-inline trap
for PoE.
Table 22. Power over Ethernet Commands (Continued)
Command Mode Description
To Next Page
Loading...
Need help?
General
