Chapter 18: SNTP Client Commands
384
Example
The following example displays the settings of the SNTP client:
awplus# show ntp associations
UTC Offset The time difference in hours between
UTC and local time. The range is -12 to
+12 hours. The default is 0 hours. This
value is set with “CLOCK TIMEZONE” on
page 377.
Daylight Savings Time
(DST)
The status of the daylight savings time
setting. The status can be enabled or
disabled. This value is set with “CLOCK
TIMEZONE” on page 377.
Table 33. SHOW NTP ASSOCIATIONS Command (Continued)
Parameter Description
To Next Page
Loading...
Need help?
General
