AT-9000 Switch Command Line User’s Guide
549
Examples
This example downloads the new management software file
“at9000_app.img” to the switch from a TFTP server that has the IP
address 149.22.121.45:
awplus> enable
awplus# copy tftp flash 149.22.121.45
at9000_app.img
This example downloads the boot configuration file “sw12a.cfg” to the
switch from a TFTP server with the IP address 112.141.72.11:
awplus> enable
awplus# copy tftp flash 112.141.72.11
sw12a.cfg
To Next Page
Loading...
