AT-9000 Switch Command Line User’s Guide
Section III: File System 903
awplus(config)# platform vlan-stacking-tpid 8100
Change the EtherType/Length
value to 0x8100 with the
PLATFORM VLAN-STACKING-
TPID command.
awplus# exit
Return to the Privileged Exec
mode.
awplus# show vlan vlan-stacking
Use the SHOW VLAN VLAN-
STACKING command to confirm
the change to the EtherType/
Length (TPID) value.
TPID INTERFACES (c)-Customer-Edge Port, (p)-Provider Port
==== =========
0x8100 port1.0.5(c)
0x8100 port1.0.6(c)
0x8100 port1.0.7(p)
To Next Page
Loading...
