Preface
Version Description
This manual matches the firmware version v10.2.
Target Readers
This manual is intended for the following readers:
Network engineers
Technical salespersons
Network administrators
Conventions in this Document
1. Universal Format Convention
Arial: Arial with the point size 10 is used for the body.
A line is added respectively above and below the prompts such as caution and note to
separate them from the body.
Format of information displayed on the terminal: Courier New, point size 8, indicating the
screen output. User's entries among the information shall be indicated with characters in
bold.
2. Command Line Format Convention
Arial is used as the font for the command line. The meanings of specific formats are
described below:
Bold: Key words in the command line (which shall be entered exactly as they are displayed),
shall be indicated with characters in bold.
Italic: Parameters in the command line (which must be replaced with actual values), shall be
indicated with italic characters.
[ ]: The part enclosed with [ ] is optional in the command.
{ x | y | ... }: It means one shall be selected among two or more options.
[ x | y | ... ]: It means one or none shall be selected among two or more options.
//: A Line starting with a double slash "//" is a comment line.
To Next Page
Loading...
Need help?
General