D-Link xStack DGS-3610 Series - Page 327

DGS-3610 Series Configuration Guide Chapter 28 OSPF Routing Protocol Configuration
28-21
Command
Meaning
DGS-3610# show ip ospf [process-id] [area-id]
database
OSPF database information
Can show the information of each type of LSAs
for specified processes.
area-id: It specifies the area on which the LSA is
to show. For a class 5 LSA, the area filtering
does not work.
DGS-3610# show ip ospf [process-id]
[area-id] database [adv-router ip-address]
DGS-3610# show ip ospf [process-id] [area-id]
database [self-originate]
DGS-3610# show ip ospf [process-id] [area-id]
database [database-summary]
DGS-3610# show ip ospf [process-id] [area-id]
database [router] [link-state-id]
DGS-3610# show ip ospf [process-id]
[area-id] database [router] [adv-router
ip-address]
DGS-3610# show ip ospf [process-id] [area-id]
database [router] [self-originate]
DGS-3610# show ip ospf [process-id] [area-id]
database [network][link-state-id]
DGS-3610# show ip ospf [process-id] [area-id]
database [network] [link-state-id] [adv-router
ip-address]
DGS-3610# show ip ospf [process-id] [area-id]
database [network][link-state-id]
[self-originate]
DGS-3610# show ip ospf [process-id] [area-id]
database [summary] [link-state-id]
DGS-3610# show ip ospf [process-id] [area-id]
database [summary] [link-state-id]
[adv-router ip-address]
DGS-3610# show ip ospf [process-id]
[area-id] database [summary] [link-state-id]
[self-originate]
DGS-3610# show ip ospf [process-id]
[area-id] database [asbr-summary]
[link-state-id]
DGS-3610# show ip ospf [process-id]
[area-id] database [asbr-summary]
[link-state-id] [adv-router ip-address]