EasyManuals Logo

Telit Wireless Solutions LE910 User Manual

Telit Wireless Solutions LE910
509 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 101 of 509
Mod. 0808 2011-07 Rev.2
+CPBS - Select Phonebook Memory Storage
SELINT 2
<storage>
"SM" - SIM phonebook
"FD" - SIM fixed dialing-phonebook (FDN)(only phase 2/2+ SIM)
"LD" - SIM last-dialing-phonebook (+CPBF is not applicable for this storage)
"MC" - device missed (unanswered received) calls list (+CPBF is not applicable
for this storage)
"RC" - ME received calls list (+CPBF is not applicable for this storage).
“MB” - mailbox numbers stored on SIM; it is possible to select this storage only
if the mailbox service is provided by the SIM (see #MBN).
"DC" - ME last-dialing-phonebook (+CPBF is not applicable for this storage).
"ME" - ME phonebook
"EN" – SIM emergency numbers phonebook (+CPBW and +CPBF not
applicable for this storage).
"ON" - SIM own numbers (MSISDNs) phonebook (+CPBF is not applicable for
this storage).
"SD" - SIM Service Dialling Numbers (SDN) phonebook (+CPBW is not
applicable for this storage).
<password>: string type value representing the PIN2-code required when selecting
PIN2-code locked <storage> above "FD
Note: If SM” is the currently selected phonebook, selecting”FD” phonebook
with “AT+CPBS=”FD”” command simply selects the FDN as the
phonebook upon which all subsequent +CPBW, +CPBF and +CPBR
commands act; the command does not deactivate “SM” phonebook, and
does not activate FDN
Note: if <password> parameter is given, PIN2 will be verified, even if it is not
required, i.e. it has already been inserted and verified during current
session
AT+CPBS?
Read command returns the actual values of the parameter <storage>, the number of
occupied records <used> and the maximum index number <total>, in the format:
+CPBS: <storage>,<used>,<total>
Note: For <storage>=”MC”: if there are more than one missed calls from the same
number the read command will return only the last call
AT+CPBS=?
Test command returns the supported range of values for the parameters <storage>.
Reference
3GPP TS 27.007
Read Phonebook Entries - +CPBR

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telit Wireless Solutions LE910 and is the answer not in the manual?

Telit Wireless Solutions LE910 Specifications

General IconGeneral
BrandTelit Wireless Solutions
ModelLE910
CategoryControl Unit
LanguageEnglish

Related product manuals