Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 37 of 509
Mod. 0808 2011-07 Rev.2
Extended S Registers Display - &V3
&V3 - Extended S Registers Display
Execution command returns the value of the S registers in decimal and hexadecimal
value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
...
where
<regn> - S register number
000..005
007
012
025
030
038
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation
Display Last Connection Statistics - &V2
&V2 - Display Last Connection Statistics
Execution command returns the last connection statistics & connection failure reason.
Single Line Connect Message - \V
\V - Single Line Connect Message
Execution command set single line connect message.
Parameter:
<n>
0 - off
To Next Page
Loading...
Need help?
General
