Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 449 of 509
Mod. 0808 2011-07 Rev.2
#SPKMUT - Speaker Mute Control
Test command reports the supported values for <n> parameter.
Digital Microphone Gain - #DIGMICG
#DIGMICG – Digital Microphone Gain
This command allows setting the microphone digital gain through 46
levels by 1 dB steps
Parameters:
<gain_level>: digital microphone input gain
0..45 - digital microphone input gain (+1dB/step, factory default = 24)
NOTE:
This command substitutes the #HSMICG command and has the same
Read command returns the current digital microphone gain level, in the
format:
Test command reports the supported range of values for parameters
<gain_level>.
To Next Page
Loading...
Need help?
General
