Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 191 of 509
Mod. 0808 2011-07 Rev.2
Product Serial Number Identification - #CGSN
#CGSN - Product Serial Number Identification
Execution command returns the product serial number, identified as the IMEI of the
mobile, with command echo.
Test command returns the OK result code.
Request International Mobile station Equipment Identity and Software Version -
+IMEISV
+IMEISV – Request International Mobile station Equipment Identity and Software
Version
Execution command returns the International Mobile station Equipment
Identity and Software Version Number, identified as the IMEISV of the
mobile, without command echo.
The IMEISV is composed of the following elements (each element shall
consist of decimal digits only):
- Type Allocation Code (TAC). Its length is 8 digits;
- Serial Number (SNR) is an individual serial number uniquely
identifying each equipment within each TAC. Its length is 6
digits;
- Software Version Number (SVN) identifies the software version
number of the mobile equipment. Its length is 2 digits.
Test command returns OK result code.
To Next Page
Loading...
Need help?
General
