Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 103 of 509
Mod. 0808 2011-07 Rev.2
+CPBR - Read Phonebook Entries
Note: if “MC” is the currently selected phonebook memory storage, a sequence of
missed calls coming from the same number will be saved as one missed call and
+CPBR will show just one line of information.
Note: If all queried locations are empty (but available), no information text lines
will be returned, while if listing fails in an ME error, +CME ERROR: <err> is
Test command returns the supported range of values for parameters <indexn> and
the maximum lengths of <number> , <text>, <group>, <secondtext> and <email>
fields fields, in the format:
+CPBR: (<minIndex> -
<maxIndex>),<nlength>,<tlength>,<glength>,<slength>,<elength>
where:
<minIndex> - the minimum <index> number, integer type
<maxIndex>- the maximum <index> number, integer type
<nlength> - maximum <number> field length, integer type
<tlength> - maximum <name> field length, integer type
<glength>: integer type value indicating the maximum length of field <group>
<slength>: integer type value indicating the maximum length of field
<secondtext>
<elength>: integer type value indicating the maximum length of field <email>
Note: the value of <nlength> could vary, depending on the availability of
Extension service, in the following situations:
1. if “SM” memory storage has been selected (see +CPBS) and the SIM
supports the Extension1 service
2. if “FD” memory storage has been selected (see +CPBS) and the SIM
supports the Extension2 service
3. if “MB” memory storage has been selected (see +CPBS) and the SIM
supports the Extension6 service
Remember to select the PB storage with +CPBS command before issuing PB
commands.
Find Phonebook Entries - +CPBF
+CPBF - Find Phonebook Entries
<findtext>
Execution command returns phonebook entries (from the current phonebook
memory storage selected with +CPBS) which alphanumeric field start with string
<findtext>.
Parameter:
<findtext> - string type; used character set should be the one selected with
To Next Page
Loading...
Need help?
General
