To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

+CPBF - Find Phonebook Entries

SELINT 2

The command returns a report in the form:

[+CPBF:

<index1>,<number>,<type>,<text>[,<hidden>][,<group>][,<adnumber>][,<adty

pe>][,<secondtext>][,<email>]<CR><LF>

+CPBF:

<index2>,<number>,<type>,<text>[,<hidden>][,<group>][,<adnumber>][,<adty

pe>][,<secondtext>][,<email>][…]]]

where:

<indexn> - the location number of the phonebook entry

<number> - string type phone number of format <type>

<type> - type of phone number octet in integer format

129 - national numbering scheme

145 - international numbering scheme (contains the character "+")

<text> - the alphanumeric text associated to the number; used character set should

be the one selected with command +CSCS.

<group>: string type field of maximum length <glength> indicating a

group the entry may belong to; character set as specified by command

Select TE Character Set +CSCS

<adnumber>: additional number ; string type phone number of format

<adtype>: type of address octet in integer format

<secondtext>: string type field of maximum length <slength> indicating a

second text field associated with the number; character set as specified

by command Select TE Character Set +CSCS

<email>: string type field of maximum length <elength> indicating an email

address; character set as specified by command Select TE Character Set +CSCS

<hidden>: indicates if the entry is hidden or not

0: phonebook entry not hidden

1: phonebook entry hidden

Note: +CPBF is not applicable if the current selected storage (see +CPBS) is

either “MC”, either “RC” or “LD”.

Note: if <findtext>=”” the command returns all the phonebook records.

Note: if no PB records satisfy the search criteria then an ERROR message is

reported.

AT+CPBF=?

Test command reports the maximum lengths of <number> and <text> fields, in the

format:

Telit Wireless Solutions LE910 User Manual

Questions and Answers: