To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

Network Survey Format - #CSURVF

#CSURVF - Network Survey Format

SELINT 2

AT#CSURVF=

[<format>]

Set command controls the format of the numbers output by all the Easy

Scan®

Parameter:

- numbers format

0 - Decimal

1 - Hexadecimal values, no text

2 - Hexadecimal values with text

AT#CSURVF?

Read command reports the current number format, as follows:

AT#CSURVF=?

Test command reports the supported range of values for the parameter

<format>.

<CR><LF> Removing On Easy Scan® Commands - #CSURVNLF

#CSURVNLF - <CR><LF> Removing On Easy Scan® Commands Family

SELINT 2

AT#CSURVNLF=

[<value>]

Set command enables/disables the automatic <CR><LF> removing from

each information text line.

Parameter:

<value>

0 - disables

removing; they’ll be present in the information text

(factory default)

1 - remove

from information text

AT#CSURVNLF?

Read command reports whether automatic <CR><LF> removing is currently

enabled or not, in the format:

<value>

AT#CSURVNLF=?

Test command reports the range of values for parameter <value>.

Extended network survey - #CSURVEXT

Telit Wireless Solutions LE910 User Manual

Questions and Answers: