To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

#ST – Socket Type

SELINT 2

AT#ST=?

Test command reports the range for parameter <connId>.

Example

single socket:

AT#ST=3

#ST: 3,2,1

Socket 3 is an UDP dialer.

All sockets:

AT#ST

#ST: 1,0,0

#ST: 2,0,0

#ST: 3,2,1

#ST: 4,2,2

#ST: 5,1,1

#ST: 6,1,2

Socket 1 is closed.

Socket 2 is closed.

Socket 3 is an UDP dialer

Socket 4 is an UDP listener

Socket 5 is a TCP dialer

Socket 6 is a TCP listener

Context Activation - #SGACT

#SGACT - Context Activation

SELINT 2

AT#SGACT=<cid>,

<stat>[,<userId>,

<pwd>]

Execution command is used to activate or deactivate either the GSM context

or the specified PDP context.

Parameters:

<cid> - PDP context identifier

0 - specifies the GSM context (not yet available)

1..5 - numeric parameter which specifies a particular PDP context definition

<stat>

0 - deactivate the context

1 - activate the context

<userId> - string type, used only if the context requires it

<pwd> - string type, used only if the context requires it

Note: context activation/deactivation returns ERROR if there is not any socket

associated to it (see AT#SCFG).

Brand	Telit Wireless Solutions
Model	LE910
Category	Control Unit
Language	English

Telit Wireless Solutions LE910 User Manual

Table of Contents

Questions and Answers:

Telit Wireless Solutions LE910 Specifications

Related product manuals