Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 453 of 509
Mod. 0808 2011-07 Rev.2
Extended tone generation - #TONEEXT
#TONEEXT – Extended tone generation
Execution command allows the reproduction of DTMF tones, standard free tone,
standard busy tone and a set of user defined tones for a infinite time, or stop the
running tone
Parameters:
< toneId > - ASCII characters in the set (0-9), #,*,(A-D),(G-L),Y,Z ;
- (0-9), #,*,(A-D) : DTMF tone
- (G-L) : User Defined Tones
8
.
- y : free tone
- z: busy tone
< act > - Action to be performed.
- 0: Stop the <toneId> if running.
-
1: Start the <toneId>.
Test command returns the range of supported values for parameter
8
See also AT#UDTSET, AT#UDTRST and AT#UDTSAV command description following in this document.
To Next Page
Loading...
Need help?
General
