To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

4.1.6.17. OTA Commands (this section is not yet supported by the first beta releases)

OTA Set Network Access Point - #OTASNAP

#OTASNAP – OTA Set Network Access Point

SELINT 2

AT#OTASNAP=

<addr>[,<company_na

me>]

Set command specifies the SMS number that the module has to use to send the

Remote Registration SM. If the current IMSI hasn’t been yet registered, the

Remote Registration SM is automatically sent.

Parameters:

<addr> - string parameter which specifies the phone number

<company_name> - string parameter containing a client identifier

Note1: a special form of the Set command, #OTASNAP=””, causes the deletion

of the SMS number

Note2: the value of <addr> parameter can be overwritten from the OTA server by

the Provisioning SMS

Note3: a change of the value of <company_name> parameter causes a new

FOTA Registration procedure

Note4: if the <company_name> is an empty string, an ERROR is returned

Note5: the setting is saved in NVM

AT#OTASNAP?

Read command reports the current settings in the format:

#OTASNAP: <addr>[,<company_name>]

AT#OTASNAP =?

Test command returns the maximum length of <addr> field and maximum

length of <company_name> field. The format is:

#OTASNAP: <nlength>,<tlength>

where:

<nlength> - integer type value indicating the maximum length of field <addr>

<tlength> - integer type value indicating the maximum length of field

<company_name>

Example

AT#OTASNAP=”SMS Number”,”Client Alpha”

AT#OTASNAP?

#OTASNAP:”SMS Number”,”Client Alpha”

AT#OTASNAP=?

#OTASNAP: 21,15

Telit Wireless Solutions LE910 User Manual

Questions and Answers: