Telit Wireless Solutions LE910 - Page 474

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 474 of 509
Mod. 0808 2011-07 Rev.2
#JDR4GCFG – LTE Jammed Detect & Report
SELINT 2
NB: See AT#JDRENH2 to set the enable of the LTE Jammed Detect & Report
feature.
AT#JDR4GCFG?
Read command reports the current settings, in the format:
#JDR4GCFG:
<P_RSRP_T4G>,<P_RSRQ_T4G>,<P_RSSNR_T4G>,0,0,0,0,0,0
AT#JDR4GCFG=?
Test command reports the supported range of values for the parameters
#JDR4GCFG:
(<P_RSRP_T4G>),(<P_RSRQ_T4G>),(<P_RSSNR_T4G>),(0),(0),(0),(0),(0),(0
)