Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 138 of 509
Mod. 0808 2011-07 Rev.2
3G Quality Of Service Profile (Requested) - +CGEQREQ
+CGEQREQ – 3G Quality Of Service Profile (Requested)
[<cid>
[,<Traffic class>
[,<Maximum bitrate UL>
[,<Maximum bitrate DL>
[,<Guaranteed bitrate UL>
[,<Guaranteed bitrate DL>
[,<Delivery order>
[,<Maximum SDU size>
[,<SDU error ratio>
[,<Residual bit error ratio>
[,<Delivery of erroneous
SDUs>
[,<Transfer delay>
[,<Traffic handling priority>
[,<Source statistics
descriptor> [,<Signalling
indication>]]]]]]]]]]]]]]]
Set command allows to specify a 3G quality of service profile for the
context identified by the(local) context identification parameter <cid>
which is used when the MT sends an Activate PDP Context Request
message to the network.
Parameters:
<cid> - PDP context identification (see +CGDCONT command).
<Traffic class> - Traffic class
0 - conversational
1 - streaming
2 - interactive
3 - background
4 - subscribed value (default value)
<Maximum bitrate UL> - Maximum bitrate Up Link (kbits/s). This
parameter should be provided if the <Traffic class> is specified as
conversational or streaming.
0 - subscribed value (default value)
1…568
576…8640
<Maximum bitrate DL> - Maximum bitrate down link (kbits/s). This
parameter should be provided if the <Traffic class> is specified as
conversational or streaming.
0 - subscribed value (default value)
1…568
576…8640
8700…16000
<Guaranteed bitrate UL> - the guaranteed bitrate up link(kbits/s). This
parameter should be provided if the <Traffic class> is specified as
conversational or streaming.
0 - subscribed value (default value)
1…568
576…8640
<Guaranteed bitrate DL> - the guaranteed bitrate down link(kbits/s).
This parameter should be provided if the <Traffic class> is specified as
conversational or streaming.
0 - subscribed value (default value)
1…568
To Next Page
Loading...
Need help?
General
