Telit Wireless Solutions LE910 - Delete Script - #DSCRIPT; Delete All Scripts - #DASCRIPTS

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 428 of 509
Mod. 0808 2011-07 Rev.2
Delete Script - #DSCRIPT
#DSCRIPT - Delete Script
SELINT 2
AT#DSCRIPT=
[<script_name>]
Execution command deletes a file from Easy Script® related NVM memory.
Parameter:
<script_name> - name of the file to delete, string type (max 16 chars, case
sensitive)
Note: if the file <script_name> is not present an error code is reported.
AT#DSCRIPT=?
Test command returns OK result code.
Example
AT#DSCRIPT="Third.py"
OK
Delete All Scripts - #DASCRIPTS
#DASCRIPT – Delete All Scripts
SELINT 2
AT#DASCRIPT
Execution command deletes all files from Easy Script® related NVM
memory.
Note: if product supports directories execution command deletes all files
from current working directory, it does not delete directories.
AT#DASCRIPT=?
Test command returns OK result code.