Telit Wireless Solutions LE910 - Message Service Failure Result Code - +CMS ERROR: Err

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 24 of 509
Mod. 0808 2011-07 Rev.2
3.2.2.2. Message Service Failure Result Code - +CMS ERROR: <err>
This is NOT a command, it is the error response to +Cxxx 3GPP TS 27.005 commands.
Syntax: +CMS ERROR: <err>
Parameter: <err> - numeric error code.
The <err> values are reported in the table:
Numeric Format
Meaning
0...127
GSM 04.11 Annex E-2 values
128...255
3GPP TS 23.040 sub clause 9.2.3.22 values
300
ME failure
301
SMS service of ME reserved
302
operation not allowed
303
operation not supported
304
invalid PDU mode parameter
305
invalid text mode parameter
310
SIM not inserted
311
SIM PIN required
312
PH-SIM PIN required
313
SIM failure
314
SIM busy
315
SIM wrong
316
SIM PUK required
317
SIM PIN2 required
318
SIM PUK2 required
320
memory failure
321
invalid memory index
322
memory full
330
SMSC address unknown
331
no network service
332
network time-out
340
no +CNMA acknowledgement expected
500
unknown error
512
FDN not allowed number