Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 295 of 509
Mod. 0808 2011-07 Rev.2
SMS AT Run White List - #SMSATWL
#SMSATWL – SMS AT Run White List
<action>
,<index>
[,<entryType>
[,<string>]]
Set command to handle the white list.
<action >:
0 – Add an element to the WhiteList
1 – Delete an element from the WhiteList
2 – Print and element of the WhiteList
< index >: Index of the WhiteList. Range 1-8
< entryType >:
0 – Phone Number
1 – Password
NOTE: A maximum of two Password Entry can be present at same time in the
white List
<string>: string parameter enclosed between double quotes containing or the
phone number or the password
Phone number shall contain numerical characters and/or the character “+” at the
beginning of the string and/or the character “*” at the end of the string.
Password shall be 16 characters length
NOTE: When the character “*” is used, it means that all the numbers that begin
with the defined digit are part of the white list.
E.g.
“+39*” All Italian users can ask to run AT Command via SMS
“+39349*” All vodafone users can ask to run AT Command via SMS.
Read command returns the list elements in the format:
#SMSATWL: [<entryType>,<string>]
Test command returns the supported values for the parameter <action>, <index>
and <entryType>
It will return ERROR if executed using SMSATRUN digest mode or TCPATRUN
server mode
To Next Page
Loading...
Need help?
General
