To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

#CODECINFO – Codec Information

SELINT 2

<codec_setn>

FR - full rate mode enabled

EFR - enhanced full rate mode enabled

HR - half rate mode enabled

FAMR - AMR full rate mode enabled

HAMR - AMR half rate mode enabled

FAWB - full rate AMR wide band

UAMR2 - UMTS AMR version 2

UAWB - UMTS AMR wide band

Note: The command refers to codec information in speech call and to channel

mode in data call.

Note: if AT#CODEC is 0, the reported codec set for <format>=0 is 255 (all

codec).

AT#CODECINFO?

Read command reports <format> and <mode> parameter values in the format:

#CODECINFO: <format>,<mode>

AT#CODECINFO=?

Test command returns the range of supported <format> and <mode>.

Note:

This command is not supported in LTE-only variants

Select language - #LANG

#LANG – select language

SELINT 2

AT#LANG=<lan>

Set command selects the currently used language for displaying different

messages

Parameter:

<lan> - selected language

“en” – English (factory default)

“it” – Italian

AT#LANG?

Read command reports the currently selected <lan> in the format:

#LANG: <lan>

AT#LANG=?

Test command reports the supported range of values for parameter <lan>

Telit Wireless Solutions LE910 User Manual

Questions and Answers: