Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 265 of 509
Mod. 0808 2011-07 Rev.2
#CODECINFO – Codec Information
<codec_used> - one of the following channel modes:
0 – no TCH
1 - full rate speech 1 on TCH
2 - full rate speech 2 on TCH
4 - half rate speech 1 on TCH
8 - full rate speech 3 – AMR on TCH
16 - half rate speech 3 – AMR on TCH
128 – full data 9.6
129 – full data 4.8
130 – full data 2.4
131 – half data 4.8
132 – half data 2.4
133 – full data 14.4
134 – full rate AMR wide band
135 – UMTS AMR version 2
136 – UMTS AMR wide band
<codec_set>
1..255 - sum of integers each representing a specific codec mode:
1 - FR, full rate mode enabled
2 - EFR, enhanced full rate mode enabled
4 - HR, half rate mode enabled
8 - FAMR, AMR full rate mode enabled
16 - HAMR, AMR half rate mode enabled
32 – FR-AMR-WB, full rate AMR wide band
64 – UMTS-AMR-V2, UMTS AMR version 2
128 – UMTS-AMR-WB, UMTS AMR wide band
(if <format>=1)
<codec_used> - one of the following channel modes:
None – no TCH
FR - full rate speech 1 on TCH
EFR - full rate speech 2 on TCH
HR - half rate speech 1 on TCH
FAMR - full rate speech 3 – AMR on TCH
HAMR - half rate speech 3 – AMR on TCH
FD96 - full data 9.6
FD48 - full data 4.8
FD24 - full data 2.4
HD48 - half data 4.8
HD24 - half data 2.4
FD144 - full data 14.4
FAWB - full rate AMR wide band
UAMR2 – UMTS AMR version 2
UAWB – UMTS AMR wide band
To Next Page
Loading...
Need help?
General
