Telit Wireless Solutions LE910 - Page 139

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 139 of 509
Mod. 0808 2011-07 Rev.2
8700…16000
<Delivery order> - SDU Delivery order
0 - no
1 – yes
2 – subscribed value (default value)
<Maximum SDU size> - Maximum SDU size in octets
0 - subscribed value (default value)
10…1500
1502
1510
1520
<SDU error ratio> - SDU error ratio
- mEe mean m*10-e , for example 1E2 mean 1*10-2
“0E0” (default value)
“1E1”
“1E2”
“7E3”
“1E3”
“1E4”
“1E5”
“1E6”
<Residual bit error ratio> - Residual bitt error ratio
- mEe mean m*10-e , for example 1E2 mean 1*10-2
“0E0” (default value)
“5E2”
“1E2”
“5E3”
“4E3”
“1E3”
“1E4”
“1E5”
“1E6”
“6E8”
<Delivery of erroneous SDUs> - Delivery of erroneous SDUs
0 - no
1 – yes
2 – no detect
3 – subscribed value (default value)
<Transfer delay > - Transfer delay (milliseconds)
0 – subscribed value (default value)
10…150