Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 140 of 509
Mod. 0808 2011-07 Rev.2
1000…4000
<Traffic handling priority > - Traffic handling priority
0 - subscribed value (default value)
1…3
<Source Statistics Descriptor>
- Characteristics of the source of the
submitted SDUs for a PDP context. This parameter should be provided if
the <Traffic class> is specified as conversational or streaming.
0 - Characteristics of SDUs is unknown (default value)
1 - Characteristics of SDUs corresponds to a speech source
<Signalling Indication> - Signalling content of submitted SDUs for a
PDP context. This parameter should be provided if the <Traffic class> is
specified as interactive.
0 - PDP context is not optimized for signalling (default value)
1 - PDP context is optimized for signalling <PDP_type> (see
+CGDCONT command).
Note: a special form of the Set command, +CGEQREQ=<cid> causes the
requested profile for context number <cid> to become undefined.
Note: the current settings are stored in NVM.
Note: set command can modify the 2G QoS according to 3GPP 23.107
Read command returns the current settings for each defined context in the
format:
[+CGEQREQ: <cid>,<Traffic class>,<Maximum bitrate
UL>,<Maximum bitrate DL>,<Guaranteed bitrate
UL>,<Guaranteed bitrate DL>,<Delivery order>,<Maximum SDU
size>,<SDU error ratio>,<Residual bit error ratio>,<Delivery of
erroneous SDUs>,<Transfer delay>,<Traffic handling>,<Source
statistics descriptor>,<Signalling indication><CR><LF>]
[+CGEQREQ:…]
If no PDP context has been defined, it has no effect and OK result code is
Test command returns as a compound value the type of the current PDP
context and the supported values for the subparameters in the format:
+CGQE
QREQ: <PD
P_Type>,(l
ist of suppor
ted <T
raffic class>
s),
(list of supported <Maximum bitrate UL>s),(list of supported
<Maximum bitrate DL>s),(list of supported <Guaranteed bitrate
UL>s),(list of supported <Guaranteed bitrate DL>s),(list of supported
<Delivery order>s),(list of supported<Maximum SDU size>s),(list of
To Next Page
Loading...
Need help?
General
