Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 105 of 509
Mod. 0808 2011-07 Rev.2
+CPBF - Find Phonebook Entries
+CPBF:
<nlength>,<tlength>,<glength>,<slength>,<elen
gth>
where:
<nlength> - maximum length of field <number>, integer type
<tlength> - maximum length of field <text>, integer type
<glength>: integer type value indicating the maximum length of field <group>
<slength>: integer type value indicating the maximum length of field
<secondtext>
<elength>: integer type value indicating the maximum length of field <email>
Note: the value of <nlength> could vary, depending on the availability of
Extension service, in the following situations:
1. if “SM” memory storage has been selected (see +CPBS) and the SIM
supports the Extension1 service
2. if “FD” memory storage has been selected (see +CPBS) and the SIM
supports the Extension2 service
1. if “MB” memory storage has been selected (see +CPBS) and the SIM
supports the Extension6 service
Remember to select the PB storage with +CPBS command before issuing PB
commands.
To Next Page
Loading...
Need help?
General
