Telit Wireless Solutions LE910 - Page 151

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 151 of 509
Mod. 0808 2011-07 Rev.2
+CGPIAF - Printing IP Address Format
1 – Use zero compression.
AT+CGPIAF?
Read command returns the current parameter setting.
AT+CGPIAF=?
Test command returns values supported as compound parameter setting.
Example
AT+CGPIAF=0,0,0,0
OK
AT#SGACT=1,1
#SGACT: 252.1.171.171.205.205.239.224.0.0.0.0.0.0.0.1
OK
at+CGPIAF=1,0,0,0
OK
AT#SGACT=1,1
#SGACT: FC01:ABAB:CDCD:EFE0:0:0:0:1
OK
Reference
3GPP TS 27.007