Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 171 of 509
Mod. 0808 2011-07 Rev.2
(Text Mode)
Parameter:
<stat>
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
"ALL" - all messages.
The representation format for stored messages (either sent or unsent) or received
messages (either read or unread, not message delivery confirm) is (the information
written in italics will be present depending on +CSDH last setting):
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>[,<tooa/toda>,
<length>]<CR><LF><data>[<CR><LF>
+CMGL: <i
ndex>,<st
at>,<oa
/da>,
<alph
a>,<sct
s>
[,<tooa/toda>, <length>]<CR><LF><data>[...]]
where:
<index> - message position in the storage
<stat> - message status
<oa/da> - originator/destination address, string type , represented in the currently
selected character set (see +CSCS)
<alpha> - string type alphanumeric representation of <da> or <oa>, corresponding
to an entry found in the phonebook; used character set is the one
selected with command +CSCS.
<scts> - TP-Service Centre Time Stamp in Time String Format
<tooa/toda> - type of number <oa/da>
129 - number in national format
145 - number in international format (contains the "+")
<length> - text length
<data> - TP-User-Data
• If <dcs> indicates that GSM03.38 default alphabet is used , each character of
GSM alphabet will be converted into current TE character set (see +CSCS)
• If <dcs> indicates that 8-bit or UCS2 data coding scheme is used, each 8-bit
octet will be converted into two IRA character long hexadecimal number (e.g.
octet 0x2A will be converted as two characters 0x32 0x41)
• If <fo> indicates that a UDH is present each 8-bit octet will be converted into
two IRA character long hexadecimal number. The <length> indicates text
length in characters without UDH length.
If there is at least one message delivery confirm to be listed the representation
format is:
To Next Page
Loading...
Need help?
General
