Telit Wireless Solutions LE910 User Manual

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 285 of 509
Mod. 0808 2011-07 Rev.2
#CSURV - Network Survey
SELINT 2
Network survey started…
arfcn: 36 bsic: 49 rxLev: -77 ber: 0.00 mcc: 222 mnc: 10 lac: 20060 cellId: 2716
2 cellStatus: CELL_SUITABLE numArfcn: 0 arfcn: numChannels: 0 array: pbcch: 0 no
m: 0 rac: 0 spgc: 0 pat: 0 nco: 0 t3168: 0 t3192: 0 drxmax: 0 ctrlAck: 0 bsCVmax
: 0 alpha: 0 pcMeasCh: 0 mstxpwr: 0 rxaccmin: 0 croffset: 0 penaltyt: 0 t3212:
0 CRH: 0
uarfcn: 10588 rxLev: -92 mcc: 222 mnc: 88 scr code: 54 cellId: 19406101 lac: 2406
5 cellStatus: CELL_SUITABLE rscp: -101 ecio: -9.0
Network survey ended
OK
Notes
and
Platform limits
This command execution takes a long time especially if the full band scan is
performed.
The module must be configured in +COPS: 2 mode.
If present, the parameters:
<s>
- starting channel
<e>
- ending channel
are only allowed in fixed couples indicating a band.
Only BCCH-carriers are reported.
Non BCCH-carriers are never reported.
In 2G
<s>,<e>
fixed couples and the corresponding band, if supported by the
product:
0,124 GSM900
975,1023 GSM900
512,885 DCS1800
128,251 GSM850
512,810 PCS1900
0,1023 all supported GSM bands
<ber>
is always 0.0.
<numArfcn>
is always 0.
<arfcn n >
is always empty.
<numChannels>
is always 0.
<ba n > is always empty.

Telit Wireless Solutions LE910 Specifications

General

Brand	Telit Wireless Solutions
Model	LE910
Category	Control Unit
Language	English