Telit Wireless Solutions LE910 - Page 324

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 324 of 509
Mod. 0808 2011-07 Rev.2
#SS - Socket Status
SELINT 2
AT#SS=?
Test command reports the range for parameter <connId>.
Example
AT#SS
#SS: 1,3,91.80.90.162,61119,88.37.127.146,10510
#SS: 2,4,91.80.90.162,1000
#SS: 3,0
#SS: 4,0
#SS: 5,3,91.80.73.70,61120,88.37.127.146,10509
#SS: 6,0
OK
Socket
1: opened from local IP 91.80.90.162/local port 61119 to remote IP
88.37.127.146/remote port 10510
is suspended with pending data
Socket 2: listening on local IP 91.80.90.162/local port 1000
Socket 5: opened from local IP 91.80.73.70/local port 61120 to
remote IP
88.37.127.146/remote port 10509
is suspended with pending data
AT#SS=2
#SS: 2,4,91.80.90.162,1000
OK
We have information only about socket number 2