Telit Wireless Solutions LE910 - Page 376

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 376 of 509
Mod. 0808 2011-07 Rev.2
#FTPPUT - FTP Put
SELINT 2
(instead of CONNECT)
Parameters:
<filename> - string type, name of the file (maximum length 200 characters)
<connMode>
0 - online mode
1 – command mode
Note: use the escape sequence +++ to close the data connection.
Note: The command causes an ERROR result code to be returned if no FTP
connection has been opened yet.
AT#FTPPUT=?
Test command reports the maximum length of <filename> and the supported range
of values of <connMode>. The format is:
#FTPPUT: <length>, (list of supported <connMode>s)
where:
<length> - integer type value indicating the maximum length of <filename>